![]() ![]() If nothing works, the auxiliary connection, also known as the mini-jack connection, should be your last resort. If desired, you can also set the projector output to analog and set the bar speaker input to analog.Connect your input device to the projector.If you want to switch between the two connections, you can also use the 3.5mm male to 2x RCA male stereo adapter.Locate the 3.5 mm port or RCA port on the bar speaker. The second end of the cable will connect to one or more compatible ports on the strip speaker.Alternatively, locate the 3.5 mm port on the projector and connect the 3.5 mm auxiliary cable to that port.Locate the RCA port on the projector and connect the left and right RCA cables to the RCA port.Here is exactly how to establish the connection. If your projector is fixed to the ceiling, then you will need to purchase a 3.5mm stereo cable long enough to properly connect the cable from the projector to the strip speakers. If your soundbar is system 5.1, then you don’t need to downgrade it.For a 7.1 soundbar system, the HDMI ARC will downgrade to 5.1.If you face any issues, restart both devices. Connect one end of the HDMI cable to the projector, and the other end to the soundbar.Find the HDMI or HDMI arc port on both devices.Switch off both your soundbar and projector.So if your projector and soundbar have the luxury of an HDMI ARC port, use a high-speed HDMI cable for the crystal clear audio. HDMI ARC is even better for the improved sound quality, but that connection is not common in low-budget projectors. So if your soundbar and projector have the HDMI or HDMI ARC port, I would suggest using that connection. The HDMI connection is the best way to connect a soundbar to Pericat projector because it offers the highest audio quality than any other cable connection. How to Connect Soundbar to Projector with HDMI
0 Comments
Leave a Reply. |